Picture of my infinite power setup.
If you set this up right, you can have infinite power.
You need:
- A condenser
- Energy Collectors (Any MK, Any amount, depending on the power you need)
- Anti-Matter Relays (Any MK, Amount that goes with the collectors)
- Pneumatic tubes
- Transposer
- Timer (Can be just a redstone clock)
- Generators (Any amount, more = more power)
- Cables (Copper cables, glass fibre cables etc)
- Whatever you use to hold your power (MFSU, MFE, Batbox)
- A piece of charcoal (Charcoal has lower EMC than coal, so its easier to make in a condenser)
Set up the condensers to create EMC with the collectors and relays (if you dont know how to do this, look it up on YouTube or something, there are plenty of tutorials).
Set up the transposer to take items out of the condenser. Use the timer to power it. The timer can be at any speed, I use the smallest possible (0.200s)
Have the pneumatic tubes connected to the transposer and have that tube go under where you want the generators to be.
Put the generators on top of the tubes. This is important. If you put them on the top they could go into the wrong slot, and not make any power.
Put your cables (whatever you picked) on top of the generators. Then have that lead to your MFSU, MFE or Batbox.
Finally, put a piece of charcoal in the condenser slot.
Adjust the amount of collectors and relays to make sure it never runs out. (3 or 4 collectors and 1 relay should run 12 or 13 generators. <-- My setup)