This article is about RedPower's pump. For the Buildcraft pump, see Pump (BC). For the IndustrialCraft pump, see Pump (IC2)

The RedPower Pump can move any liquid (Water, Lava, Oil, or Fuel) through its thick input side to the thin output side, above the lights on the thick side there is an arrow indicating the way the liquid will flow, and as long as there is another Grate, connected with some Fluid Pipe, the liquid will flow out of it.


Crafting GUI.png

Iron Ingot

Fluid Pipe

Iron Ingot

Iron Ingot

Blulectric Motor

Blue Alloy Ingot

Iron Ingot

Fluid Pipe

Iron Ingot

Pump (RedPower)


The pump itself requires Blulectric power (around 8.15 W) as well as a continuous redstone signal to operate. While the pump has enough power and a steady signal, it will continuously pump any liquid it can find on the input side.

WARNING: When pumping a non-viscous liquid, such as water or fuel, the pump tends to produce more liquid at the output than was present at the input. This may cause any storage containers to overfill, causing a significant cleanup job. The pump is very powerful and capable of filling large spaces with liquid in a few minutes.

Java 2012-10-22 20-54-52-55

The chaos redpower pumps can cause to the nether

Pump Example

An example usage of the Pump.

Start a Discussion Discussions about Pump (RedPower)

  • which pump

    3 messages
    • Use the BuildCraft pump to move oil source blocks into a tank, use the RedPower pump to move source blocks from one place to another.
    • Buildcraft
Community content is available under CC-BY-SA unless otherwise noted.